MechaBay

Me02R-F02 Messer Type-F02

General purpose mobile suit mass produced by Anaheim Electronics.
Jenxi Seow Published 21 Jun 2021 Updated 9 Jan 2025
Me02R-F02 Messer Type-F02

The Me02R-F02 Messer Type-F02 was a general purpose mobile suit mass produced by Anaheim Electronics for the anti-Earth Federation military group Mafty.

The “Me” type code means it was a Messer mobile suit design and the “02” model number indicated it was the second design. The “R” variant code meant it was designed for reconaissance use. The “F02” variant code designated it as the Type-F02 variation.

History

Anti-Earth Federation group Mafty tasked Anaheim Electronics with the creation of a new mobile suit design that could hold its own against mobile suits used by the Federation. Anaheim Electronics developed the Me02R-F01 Messer Type-F01 from the AMS-119 Geara Doga and MSN-04 Sazabi. It was then developed into the Me02R-F02 Messer Type-F02 and Me02R-Fc Messer Type-F Naked (Commander Type).

In April UC 105, Mafty deployed several units in the attack on Davao targeting several Federation cabinet ministers.

Me02R-F02 Messer Type-F02 front view
Me02R-F02 Messer Type-F02 front view
Me02R-F02 Messer Type-F02 rear view
Me02R-F02 Messer Type-F02 rear view

Design

Anaheim Electronics developed the Me02R-F01 Messer Type-F01 from Neo Zeon mobile suits AMS-119 Geara Doga and MSN-04 Sazabi. Thus, the Me02R-F02 Messer Type-F02 also featured the typical Zeon design elements the Messer Type-F01 had, such as a mono-eye, a more rounded silhouette and a spiked shoulder armor.

Like its predecessor, the Messer Type-F02 had thick Gundarium alloy alloy armor that provided heavy protection while remaining relatively lightweight. Unlike the Messer Type-F01, it had additional armor on its legs to assist with hovering.

It was powered by the same ultracompact Minovsky power plant used by the Messer Type-F01 that generated an output of 3,340 kW.

The mobile suit had an array of rocket thrusters that generated 80,000 kg of thrust and gave it high manoeuvrability and mobility.

The Messer Type-F02 had a standard cockpit in its torso with a panoramic monitor and linear seat. Its standard sensors gave it a detection range of up to 19,300 metres.

Me02R-Fc Messer Type-F Naked (Commander Type) hatch
Me02R-Fc Messer Type-F Naked (Commander Type) hatch
Me02R-Fc Messer Type-F Naked (Commander Type) controls
Me02R-Fc Messer Type-F Naked (Commander Type) controls
Me02R-Fc Messer Type-F Naked (Commander Type) cockpit
Me02R-Fc Messer Type-F Naked (Commander Type) cockpit

Armaments

The Messer Type-F02’s standard weapons were two beam sabers for melee combat and a long beam rifle for ranged attacks.

Long beam rifle

The Long Beam Rifle was the Messer Type-F02’s primary weapon. It had a long barrel and an optical sight to assist the pilot in long-range sniping.

The rifle drew its rounds from energy packs (E-packs), clips of charged Minovsky particles. Minovksy particles broke down matter at a molecular level, allowing the beam rifle bolts to penetrate even the thickest armor. This meant that a single shot could destroy a mobile suit. These E-packs were used by the RGM-89 Jegan Type-A and other modern mobile suits.

The pilot could also choose to mount two E-packs under the barrel.

Me02R-F02 Messer Type-F02 Long Beam Rifle
Me02R-F02 Messer Type-F02 Long Beam Rifle

Vulcan guns

Three pairs of fire-linked gatling vulcan guns were mounted on either sides of the Messer Type-F02’s head.

The six vulcan guns were used primarily against light-armored support units. Sustained fire from the guns could damage mobile suits and were often used in close distance combat. They also served as missile defence.

Beam sabers

The Messer Type-F02 carried two beam sabers for melee combat. These were the same as the ones used by the RGM-89 Jegan Type-A. They were docked in the recharge racks when not in use.

The beam sabers used an I-field to contain Minovsky particles within the shape of a blade. Minovsky particles broke down matter at a molecular level. This meant that the beam saber could cut through almost any material.

Minovsky particles were channelled into the saber through an E-cap attached to its hilt. The E-cap recharged with Minvosky particles from the mobile suit’s reactor when the saber was stored in the recharge dock.

Shield

The mobile suit mounted a large shield on its left arm for defence. It was able to withstand high-powered beam attacks. The shield also functioned as a weapon rack, allowing the pilot to store spare E-packs for the beam rifle and beam sabers.

Me02R-F02 Messer Type-F02 shield
Me02R-F02 Messer Type-F02 shield

Mines

The Messer Type-F02 could optionally carry mines on its rear skirt armor. The mobile suit dropped the mines in carpet bombing runs.

Me02R-F02 Messer Type-F02 hangar maintenance
Me02R-F02 Messer Type-F02 hangar maintenance
Me02R-F02 Messer Type-F02 Minelayer front view
Me02R-F02 Messer Type-F02 Minelayer front view
Me02R-F02 Messer Type-F02 Minelayer rear view
Me02R-F02 Messer Type-F02 Minelayer rear view

Known pilots

  • Fencer Mayne
  • Golf

Behind the scenes

Katoki Hajime and Nakatani Seiichi were the original mechanical designers.

The name Messer comes from the German word “Messer” which means dagger.

Gunpla

Bandai made the P-Bandai 1/144 HGUC Messer Type-F02 available for pre-orders in September 2021.

Buying through our links helps us earn a commission to keep the site alive.

1/144 HGUC Messer Type-F01
1/144 HGUC Messer Type-F01

Appearances

  • Mobile Suit Gundam Hathaway